Dimmable Ceiling Lights, Dimmable Lights

The Application of Dimmable LED Spots and Bulbs


Among the issues of LED lighting is among the most recent challenges still to be solved. Dimming LEDs is since dimming, that’s the modification of present, has been an alternative. However, this method only works when used with a single LED bulb. Systems of LEDs require a more sophisticated process of dimming. Dimming’s two forms will be the PWM or Pulse-Width-Modulation as well as the dimming, both of which are regulators. These two types are similar in the sense that they control the current through the diode.

Analog dimming is a method of dimming; it is the modification of cycle-by-cycle of this LED current. The present is corrected to the LED rising and decreasing its intensity.

Analog dimming’s disadvantage is that it only works securely as we dim a light bulb that is single. Systems of LED lights require a more elegant technique. The difficulty of dimming a system of LED lights is that there are many types of LEDs, necessitating various methods. When there’s a method, the LEDs may respond diversely to the amount of current, and as the present is reduced some LEDs can turn than others. Also, analog dimming mostly changes the color of the lighting, similarly.

The most often used method of dimming LEDs is Pulse-Width Modulation, which is the cutting of this phase at a frequency that is specific. PWM switches the devices between fully on and off at a frequency that cannot be advised by the eye LED bulbs to run on the current advocated. The frequency of switching determines the brightness of lighting, so the longer the lights are “on”, the brighter the light is. This is the same technique used in fluorescent lighting dimmers as well, except that incandescent lights respond to present and therefore require a different frequency.

Two sorts of Pulse-With Modulation signs are frequently used with dimming techniques. These two are various methods of cutting on the phase and result in separate dimming technologies. The dimmers of LEDs use the technology solely. Dimmers marked as R or RL are suitable for LEDs because they operate with the top edge technology and do not include transformers. TRIAC drivers, or devices governed by the DMX and digital addressable lighting interface (DALI) protocols and, in the future, may include wireless (RF) as a control alternative, that is dimmers that slide or turn using a knob, all operate with dimmable LEDs.

Alas, leading-edge technologies are usually powered by an electric transformer, including dimmable LEDs.

The other sort of phase-cutting method is trailing edge technique, typically used in MOSFET or is not suitable for nearly all dimmable LEDs. One of the most recent creations is that the RAIS lamp technology. RAIS lamps seem to work with all sorts of dimmers and offer a degree of functionality. Nevertheless RAIS technology is still new, and its impact on LEDs have not been fully tested. Should they prove to be trustworthy their application both domestically and can turn out to be much safer and easier than previous dimmable LED lights‘.

In the technology of LED lights, dimmable LEDs are still to be designed to grip and performance. As there is no general rule for what dimmer your LED may be suitable for, always check the details. Application of LED lights using non-compatible dimmers may ruin the LEDs, and they are, at the moment, not the solution of lighting.


Martin Riley